BeeProg3 interfaces with any IBM PC compatible personal computers, running MS Windows OS, through USB(2.0 HigSpeed) port or LAN port (100 Mb).Programming modules construction is designed for perfect stability at the top of the programmer, to be tough enough for insert/replace chips by mechanical arm and also allows to keep identical position of ZIF socket also after replacing of the module.The programming modules are identical for all programmers based on the BeeProg3 programming core ( BeeHive304 for example). But if it is possible, then universal programming modules, dedicated for IC package type, are used. For the proper and reliable programming of ultra-fast memories the BeeProg3 utilizes specialized modules, optimally designed for specific device families, exactly according to the needs of programmed devices.You have freedom to choose the optimal device for your design.
You can be sure the next devices support will require the software update only, at the most (if necessary) simple programming module, therefore the costs of ownership is minimized. It partially supports also devices “from yesterday”.
BeeProg3 supports all kinds of types and silicon technologies of today’s and tomorrow’s programmable devices.Tests show, that the BeeProg3 is currently faster than all competitors in this price category (status: 10/2015), and for many chips is the fastest at all.
For example, the 8 GB eMMC NAND Flash could be done in less than 250 sec – if programmed memory allow that speed. This is reflected in extremely short programming times. The achieved ultra fast programming speed – more than 31 MB/s sustainable – is actually higher, than can be utilized for most of real devices. BeeProg3 programmer core is based on a state of the art FPGA, powerful ARM processor and internal SSD to be ready to program devices at theoretically possible speeds.Designed with great emphasis on technical perfection and speed of hardware, this programmer perfectly fits for high-demanding desktop programming as well as for automated programming systems and ATE machines, where ensures the highest quality and overall yield.BeeProg3 is next member of Elnec universal programmer series, built to meet the strong demand for an extremely fast and reliable programmer for high-capacity memories.Multiprogramming possible by attaching more programmers to one PC.unique quick reaction to customer’s needs – software update can be ready within a day from request, by OnDemand software.comfortable and easy to use control program, works with all versions of MS Windows from Windows XP to Windows 10(32-bit and 64-bit).dual connection to the PC: USB (2.0 HighSpeed) and LAN (100 Mbit).ESD protection on each pin of the pindriver.it utilizes both universal programming modules, dedicated for IC package type and specialized modules, designed optimized for specific device families.the 8 GB eMMC NAND Flash could be done in less than 250 sec, if supported memory is fast enough.Sustainable programming speed greater than 31 MBytes per second ultra fast programming speed, one of the fastest programmers worldwide.it supports devices with VCC voltages as low as 0.8V.logic signals frequency up to 125MHz at 3.3V and 80MHz at 5V.64-pins rich-features, precise and powerful pindriverprovides programming signals for every technology of programmable devices.based on a state of the art FPGA design, powerful ARM processor and internal SSD, the BeeProg3 is ready to program devices at theoretically possible speeds.the programmer perfectly fits for high-demanding desktop programming, as well as for automated programming systems.the BeeProg3 was designed meticulously with attention to details, quality and reliability.Ultra speed universal 64-pindrive programmer,ĭesign focused on high-capacity memories programming.